Warn Industries - Ultimate Performance Series: 9.5si

Ultimate Performance Series: 9.5si

WARN 9.5si

$2,069.99
* Typically ships within 2 business days

SOLID STATE CONTROLS DELIVER THE ULTIMATE IN RELIABILITY
Warn Industries has taken MOSFET (Metal-Oxide-Semiconductor Field-Effect-Transistor) technology and put it to work for serious off-roaders. The 9.5si MOSFET control module eliminates the solenoid pack and its electro-mechanical functions. Operating temperatures from -40 degree F to +180 degree F won't phase it. Voltage drop to the winch is minimal for more efficient operation and low heat gain.

With its extreme sealing system and the 12.5 lb aluminum die-cast body, the 9.5si is the winch for the really serious user who requires the ultimate in reliability, durability and control.

9.5si SPECS/PART NUMBERS

Part Number: 67600 (12V)

Rated Line Pull: 9,500 lbs. (4310 kgs) single-line

Intended Use/Application: Vehicle Recovery / For Trucks and SUVs

Duty Cycle Rating:

Motor: Gen II, Series Wound

Remote Control: 9.5si remote switch 12' (3.7) lead

Controller Capabilities: M.O.S.F.E.T. technology with diagnostic capabilities

Geartrain: 3-Stage Planetary

Gear Ratio: 156:1

Clutch (freespooling): Sliding Ring Gear

Brake: Automatic Direct Drive Cone

Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)

Weight: 89lbs. (36.3kgs.)

Wire Rope: 125', 5/16" diameter (38m, 8mm diam.)

Fairlead: Roller

Recommended Battery: 650 CCA minimum for winching

Battery Leads: 2 gauge, 72" (1.83m)

Finish: High-gloss powder coat over primer undercoating

CE Winches: CE products are designed to meet European Standards. CE winches include CE labels and Manuals.

12V DC PERFORMANCE SPECS
Line Pull Lbs.(Kgs.)	Line Speed FT./min(M/min.)	Motor Current	Pull by layer layer/Lbs(Kgs.)
0	62(18.9)	47 amps	1/9500(4313)
2000(910)	16.3(4.97)	160 amps	2/8650(3927)
4000(1810)	11.8(3.60)	230 amps	3/7920(3595)
6000(2720)	9.31(2.84)	305 amps	4/7400(3359)
8000(3630)	7.59(2.31)	370 amps	5/649(3150)
9500(4310)	6.67(2.03)	425 amps

Above performance specs are based on first layer of drum

Winch Dimensions: 23.1" L. x 6.3" D. x 10.0" H.
(587mm L. x 160mm D. x 254mm H.)

Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)

Replacement Parts

9.5si Parts List

9.5si Operator's Manual

Winching Techniques

	INDUSTRY LEADING TECHNOLOGY
	NO-COMPROMISE CONSTRUCTION
	HIGHEST PERFORMANCE & RELIABILITY
	EXTREME SEALING
	WARN LIMITED LIFETIME WARRANTY

Winch Mounts for JEEP
Mounts your WARN winch to the WARN Rock Crawler bumper, factory bumper or optional factory tube bumper.

Winch Accessories
Designed to make winching easier and to maximize your winch's capabilities.