| |
 |
| TABOR 9K |
| $649.99 | | | * Typically ships within 2 business days |
A TOUGH WINCH AT A GREAT VALUE
The Tabor 9K by Warn Industries comes with an automatic brake, 100 ft of wire rope, low-profile
freespool actuator and a 3-stage planetary geartrain. It's a whole lot, for a whole little.
|
| TABOR 9 SPECS |
| Part Number: 900560 |
| Rated Line Pull: 9,000 lbs. (4080 kgs) single-line |
| Intended Use/Application: Vehicle Recovery / For Trucks and SUVs |
Duty Cycle Rating:  |
| Motor: Gen II, Series Wound |
| Remote Control: Remote switch, 12' (3.7m) lead |
| Geartrain: 3-Stage Planetary |
| Gear ratio: 216:1 |
| Clutch (freespooling): Sliding Ring Gear |
| Brake: Automatic Direct Drive Cone |
| Drum diameter/Length: 2.5"/9.0" (6.4cm/23cm) |
| Weight: 89 lbs. (36.3kgs.) |
| Wire rope: 100', 5/16" diameter (30m, 8mm diam.) |
| Fairlead: Roller |
| Recommended Battery: 650 CCA minimum for winching |
| Battery leads: 2 gauge, 72" (1.83m) |
| Finish: Powder Coat |
|
| 12V DC PERFORMANCE SPECS |
Line Pull
Lbs.(Kgs.) |
Line Speed
FT./min(M/min.) |
Motor
Current |
Pull by layer
layer/Lbs(Kgs.) |
| 0 |
29.5 (8.99) |
71 amps |
1/9000 (4082) |
| 2000 (910) |
13.7 (4.18) |
185 amps |
2/8190 (3715) |
| 4000 (1810) |
9.5 (2.90) |
277 amps |
3/7500 (3402) |
| 6000 (2720) |
6.8 (2.07) |
372 amps |
4/7010 (3180) |
| 8000 (3630) |
5.1 (1.55) |
464 amps |
|
| 9000 (4080) |
4.5 (1.37) |
508 amps |
|
|
| |
| Above performance specs are based on first layer of drum |
|
| Winch Dimensions: 20.8" L. x 6.3" D. x 6.4" H. (528mm L. x 160mm D. x 182mm H.) |
| Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm) |
|
|
|
Replacement Parts 
