Fire Rescue Winches: PowerPlant HP


POWERPLANT DUAL FORCE HP
Winch and compressor in one compact unit

Two tasks, one tool. A integrated, powerful way to bring both an air compressor and a 9,500 lb. winch wherever you need. Great for brush trucks or Jeeps.

  • A vehicle-mounted multitool combining a winch and a premium air compressor
  • 9,500 lb. (4,310 kg) pulling capacity with fast linespeed
  • Air compressor with flow ratings of 90 CFM @ 0 PSI; 5 CFM @ 90 PSI. 100 PSI max. (340 l/min. @ 0 kPA; 142 l/min. @ 620 kPA. 690 kPA max.)
  • 1/2 gallon (1.9 l) on-board air tank/intercooler
  • Extended-duty contactor control pack
  • Thermometric switch protects against overheating
  • 125' of 5/16" (38 m of 8 mm) wire rope and roller fairlead
  • Available in 12V only

 


POWERPLANT HP SPECS/PART NUMBER
Rated Line Pull: 9,500 lbs. (4310 kgs) single-line
Motor: Gen ll Series Wound 4.6 hp 12V, with Thermal Protection Shutoff Switch
Electrical controls: Contactor
Remote Control: Remote switch with Thermometric
Geartrain: 3-stage planetary
Gear ratio: 156:1
Clutch (freespooling): Sliding ring gear
Brake: Integrated direct-drive cone brake
Wire rope: 125 ft of 5/16 in (38m of 8mm diam.)
Fairlead: Roller
Recommended battery: 650 CCA minimum
Battery leads: 2 gauge, 72 in (1.83m)
Finish: High-gloss black powdercoat
Drum diameter/Length: 2.5 in/9 in (6.4cm/23cm)
Weight: 100 lbs (45 kgs)
Air Reservoir: 1/2 gallon tank with
High Air Flow Rating: 12 CFM @ 0 psi, 5 CFM @ 90 psi
Max Air Pressure: 100 psi
Air Pressure Switch: Yes
Air Hose: 12 in nylon, with quick-disconnect. Brass air fittings and couplings


12V DC PERFORMANCE SPECS
Line Pull
Lbs.(Kgs.)
Line Speed
FT./min(M/min.)
Motor
Current
Pull by layer
layer/Lbs(Kgs.)
0 26.9 (8.2) 88 amps 1/9500 (4313)
2000 (910) 14.6 (4.45) 195 amps 2/8650 (4927)
4000 (1810) 10.3 (3.14) 262 amps 3/7920 (3595)
6000 (2720) 7.8 (2.38) 345 amps 4/7400 (3359)
8000 (3630) 6.1 (1.86) 420 amps 5/6940 (3150)
9500 (4310) 5.2 (1.58) 454 amps
Winch Dimensions: 14.42" L. x 4.53" D. x 4.69" H. (375mm L. x 115mm D. x 119mm H.)
Mounting Bolt Pattern: 3.0" x 6.59" (76mm x 167mm)