French
Rechercher

XD9i Multi-Mount Winch

Numéro de pièce du fabricant: 37441
This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov
$1,763.45
This Warn Industries XD9000i Series 12 volt electric Winch is portable and has a pull capacity of 9,000 pound. It has a 125 feet wire rope.

All the power and reliability of the XD9000I in a portable package. No load retrieval line speed is fast 38 Foot per Minute. Integrated control pack protects the Winch's electrical components, and the 4.6 Horsepower Series wound motor delivers big torque and power. Plugs into any standard 2 Inch Class III receiver Hitch and gives you the ability to move the Winch from the front or back of your rig. Power is supplied through quick connect plugs. A good choice for full size rigs and heavier recovery situations. This kit includes Winch, remote, carrier, 7.5 Foot power lead with quick connect plug for front of vehicle and hawse fairlead.

 

  • Ability To Run Cool
  • Low Ampere Draw
  • Integrated Control Pack
  • Plugs Into Standard 2 Inch Class III Receiver Hitch
  • Winch From Front Or Back Or Your Rig
  • Limited 1 Year Warranty
Spécifications des produits
Type Electric
Mount Type Portable
Recommended Use Vehicle Recovery
Voltage 12 Volt
Motor Horsepower 4.6 Horsepower
Electrical Control Type Solenoid
Motor Type Series Wound
Thermal Shutoff No
Drive Gear Type Planetary
Gear Reduction Ratio 156:1
Free Spooling Yes
Brake Type Direct Drive Cone
Line Diameter (IN) 5/16 Inch
Line Length (FT) 125 Feet
Line Material Steel
Fairlead Type Hawse
Conforms To J706 Standards No
Remote Type Handheld Remote Switch
Mounting Hole Quantity 4
Operation Type Automatic
Mounting Pattern Length (IN) 10 Inch
Mounting Pattern Width (IN) 4-1/2 Inch
Includes Mounting Hardware No
Color Gray
Max Line Pull/ Line Speed 9000 Pound/ 3.9 Feet Per Minute
Max Amp Draw/ Line Pull 478 Amp Draw/ 9000 Pound
Entrez votre propre avis Close Review Form
  • Seuls les utilisateurs enregistrés peuvent saisir des avis
  • Mauvais
  • Excellent
Description

All the power and reliability of the XD9000I in a portable package. No load retrieval line speed is fast 38 Foot per Minute. Integrated control pack protects the Winch's electrical components, and the 4.6 Horsepower Series wound motor delivers big torque and power. Plugs into any standard 2 Inch Class III receiver Hitch and gives you the ability to move the Winch from the front or back of your rig. Power is supplied through quick connect plugs. A good choice for full size rigs and heavier recovery situations. This kit includes Winch, remote, carrier, 7.5 Foot power lead with quick connect plug for front of vehicle and hawse fairlead.

 

  • Ability To Run Cool
  • Low Ampere Draw
  • Integrated Control Pack
  • Plugs Into Standard 2 Inch Class III Receiver Hitch
  • Winch From Front Or Back Or Your Rig
  • Limited 1 Year Warranty
Spécifications des produits
Type Electric
Mount Type Portable
Recommended Use Vehicle Recovery
Voltage 12 Volt
Motor Horsepower 4.6 Horsepower
Electrical Control Type Solenoid
Motor Type Series Wound
Thermal Shutoff No
Drive Gear Type Planetary
Gear Reduction Ratio 156:1
Free Spooling Yes
Brake Type Direct Drive Cone
Line Diameter (IN) 5/16 Inch
Line Length (FT) 125 Feet
Line Material Steel
Fairlead Type Hawse
Conforms To J706 Standards No
Remote Type Handheld Remote Switch
Mounting Hole Quantity 4
Operation Type Automatic
Mounting Pattern Length (IN) 10 Inch
Mounting Pattern Width (IN) 4-1/2 Inch
Includes Mounting Hardware No
Color Gray
Max Line Pull/ Line Speed 9000 Pound/ 3.9 Feet Per Minute
Max Amp Draw/ Line Pull 478 Amp Draw/ 9000 Pound