French
Rechercher

M12 12V Heavyweight Winch

Numéro de pièce du fabricant: 17801
This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov
$2,090.99
This Warn Industries M12000 Series 12 volt electric Winch is vehicle mounted and has a pull capacity of 12,000 pound. It has a 125 feet wire rope. Note: This Winch will require winch mount for proper installation.
+ -

Champion workhorse for heavy-duty winching. 3-stage planetary gear train combined with a 4.6hp series wound motor produce 12,000 lbs. of pulling power. Design is low profile so it fits where you want it.

  • 12,000 lb. (5,440 kg) pulling capacity (single line)
  • Large frame winch design is designed to handle heavier winch loads
  • Series-wound, high-speed motor provides fast line speed and strong pulls
  • Brake provides superior control while winching
  • Remote-mount control box allows for various mounting options
  • Durable 3-stage planetary geartrain for smooth, reliable, operation
  • Remote control with 12' (3.7m) lead
  • Chip-resistant powder-coated finish
  • 125' of 3/8" (38m of 9.5mm) diameter wire rope
  • Limited Lifetime Warranty
Spécifications des produits
Type Electric
Mount Type Vehicle Mounted
Recommended Use Vehicle Recovery
Voltage 12 Volt
Motor Horsepower 4.6 Horsepower
Electrical Control Type Contactors
Motor Type Series Wound
Thermal Shutoff No
Drive Gear Type Planetary
Gear Reduction Ratio 261:1
Free Spooling Yes
Brake Type Mechanical Cone
Line Diameter (IN) 3/8 Inch
Line Length (FT) 125 Feet
Line Material Steel
Fairlead Type Roller
Conforms To J706 Standards No
Remote Type Handheld Remote Switch
Mounting Hole Quantity 4
Operation Type Automatic
Mounting Pattern Length (IN) 10 Inch
Mounting Pattern Width (IN) 4-1/2 Inch
Includes Mounting Hardware No
Color Gray
Max Line Pull/ Line Speed 12000 Pound/ 3.86 Feet Per Minute
Max Amp Draw/ Line Pull 440 Amp Draw/ 12000 Pound
Entrez votre propre avis Close Review Form
  • Seuls les utilisateurs enregistrés peuvent saisir des avis
  • Mauvais
  • Excellent
Description

Champion workhorse for heavy-duty winching. 3-stage planetary gear train combined with a 4.6hp series wound motor produce 12,000 lbs. of pulling power. Design is low profile so it fits where you want it.

  • 12,000 lb. (5,440 kg) pulling capacity (single line)
  • Large frame winch design is designed to handle heavier winch loads
  • Series-wound, high-speed motor provides fast line speed and strong pulls
  • Brake provides superior control while winching
  • Remote-mount control box allows for various mounting options
  • Durable 3-stage planetary geartrain for smooth, reliable, operation
  • Remote control with 12' (3.7m) lead
  • Chip-resistant powder-coated finish
  • 125' of 3/8" (38m of 9.5mm) diameter wire rope
  • Limited Lifetime Warranty
Spécifications des produits
Type Electric
Mount Type Vehicle Mounted
Recommended Use Vehicle Recovery
Voltage 12 Volt
Motor Horsepower 4.6 Horsepower
Electrical Control Type Contactors
Motor Type Series Wound
Thermal Shutoff No
Drive Gear Type Planetary
Gear Reduction Ratio 261:1
Free Spooling Yes
Brake Type Mechanical Cone
Line Diameter (IN) 3/8 Inch
Line Length (FT) 125 Feet
Line Material Steel
Fairlead Type Roller
Conforms To J706 Standards No
Remote Type Handheld Remote Switch
Mounting Hole Quantity 4
Operation Type Automatic
Mounting Pattern Length (IN) 10 Inch
Mounting Pattern Width (IN) 4-1/2 Inch
Includes Mounting Hardware No
Color Gray
Max Line Pull/ Line Speed 12000 Pound/ 3.86 Feet Per Minute
Max Amp Draw/ Line Pull 440 Amp Draw/ 12000 Pound