French
Rechercher

XD9i Winch

Numéro de pièce du fabricant: 27550
This product can expose you to chemicals which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov
Appelez-nous pour connaître le prix
This Warn Industries XD9000i Series 12 volt electric Winch is vehicle mounted and has a pull capacity of 9,000 pound. It has a 125 feet wire rope. Note: This Winch will require winch mount for proper installation.

You'll see more XD9000I Winches on trail rigs than any other winch. No load line speed of 38 Foot per Minute and three-stage planetary gearing and the ability to run cool with low ampere draw for long Winching cycles are just a few reasons why. The XD9000I features an integrated control pack and all metal housing, which protects the Winch's electrical components the way a roll cage protects you. Comes with 125' of 5/16" wire rope. 

 

  • Competition Grade Power, Speed And Reliability
  • Pulling Capacity Up To 9,000 Pounds
  • Three Stage Planetary Gearing
  • Ability To Run Cool
  • Low Ampere Draw
  • Remote control with 12' (3.7m) lead
  • Durable 5/16" (8mm) diameter galvanized steel wire rope.
  • Limited Lifetime Warranty
Spécifications des produits
Type Electric
Mount Type Vehicle Mounted
Recommended Use Vehicle Recovery
Voltage 12 Volt
Motor Horsepower 4.6 Horsepower
Electrical Control Type Solenoid
Motor Type Series Wound
Thermal Shutoff No
Drive Gear Type Planetary
Gear Reduction Ratio 156:1
Free Spooling Yes
Brake Type Direct Drive Cone
Line Diameter (IN) 5/16 Inch
Line Length (FT) 125 Feet
Line Material Steel
Fairlead Type Roller
Conforms To J706 Standards No
Remote Type Handheld Remote Switch
Mounting Hole Quantity 4
Operation Type Automatic
Mounting Pattern Length (IN) 10 Inch
Mounting Pattern Width (IN) 4-1/2 Inch
Includes Mounting Hardware No
Color Gray
Max Line Pull/ Line Speed 9000 Pound/ 3.9 Feet Per Minute
Max Amp Draw/ Line Pull 478 Amp Draw/ 9000 Pound
Entrez votre propre avis Close Review Form
  • Seuls les utilisateurs enregistrés peuvent saisir des avis
  • Mauvais
  • Excellent
Description

You'll see more XD9000I Winches on trail rigs than any other winch. No load line speed of 38 Foot per Minute and three-stage planetary gearing and the ability to run cool with low ampere draw for long Winching cycles are just a few reasons why. The XD9000I features an integrated control pack and all metal housing, which protects the Winch's electrical components the way a roll cage protects you. Comes with 125' of 5/16" wire rope. 

 

  • Competition Grade Power, Speed And Reliability
  • Pulling Capacity Up To 9,000 Pounds
  • Three Stage Planetary Gearing
  • Ability To Run Cool
  • Low Ampere Draw
  • Remote control with 12' (3.7m) lead
  • Durable 5/16" (8mm) diameter galvanized steel wire rope.
  • Limited Lifetime Warranty
Spécifications des produits
Type Electric
Mount Type Vehicle Mounted
Recommended Use Vehicle Recovery
Voltage 12 Volt
Motor Horsepower 4.6 Horsepower
Electrical Control Type Solenoid
Motor Type Series Wound
Thermal Shutoff No
Drive Gear Type Planetary
Gear Reduction Ratio 156:1
Free Spooling Yes
Brake Type Direct Drive Cone
Line Diameter (IN) 5/16 Inch
Line Length (FT) 125 Feet
Line Material Steel
Fairlead Type Roller
Conforms To J706 Standards No
Remote Type Handheld Remote Switch
Mounting Hole Quantity 4
Operation Type Automatic
Mounting Pattern Length (IN) 10 Inch
Mounting Pattern Width (IN) 4-1/2 Inch
Includes Mounting Hardware No
Color Gray
Max Line Pull/ Line Speed 9000 Pound/ 3.9 Feet Per Minute
Max Amp Draw/ Line Pull 478 Amp Draw/ 9000 Pound